Driving Curriculum

Structured progressive masterclasses for manual transmission proficiency

Training Progress

Module 1 of 5: Finding the Bite Point

Lessons:0 / 5
Stars:★ 0 / 15
0% Total Curriculum Completion
Interactive Lesson Modules
Lesson 1Beginner⏱ 2 mins

Finding the Bite Point

Clutch Friction Zone & Idle Creep

Learn clutch modulation and locate the friction zone without touching the gas pedal. Bring the car to a forward creep above 1.0 km/h without stalling.

Lesson 2Beginner⏱ 3 mins

Smooth Flat Starts

Throttle & Clutch Coordination

Coordinate 1,500–2,000 RPM gentle throttle with progressive clutch release to accelerate smoothly past 15 km/h from a standstill.

Lesson 3Intermediate⏱ 3-4 mins

Sequential Upshifting

Coordinating 1st → 2nd → 3rd Gear

Accelerate in 1st gear, shift smoothly into 2nd gear, match revs on re-engagement, and upshift into 3rd gear cruising above 35 km/h.

Lesson 4Advanced⏱ 3-4 mins▲ 10% Slope

Hill Starts & Handbrake Transition

10% Incline Rollback Prevention

Master the handbrake-to-clutch transition on a 10% uphill gradient. Pre-load clutch torque to hold the grade, release the handbrake with rollback < 0.1m, and climb past 10 km/h.

Lesson 5Advanced⏱ 3-4 mins

Downshifting & Rev Matching

Smooth Downshift Deceleration (3rd → 2nd)

From 3rd gear cruising at 40 km/h, brake down to 25 km/h, depress clutch, blip throttle to match revs, select 2nd gear, and release clutch smoothly without driveline jolt.